The FeedbacK: Connect Bluetooth (FdbK-C) adopts echo cancellation technology to deliver high-level sound quality through a simple, hands-free devices.
1. Switch on/off, paring, microphone mute
3. Volume up
4. Volume down
6. Charging port
8. Belt clip
Charging / Battery
FdbK-C has a built in rechargeable battery. Prior to first use, fully charge the battery for 2-3 hours.
Connect charging port to a power source. A RED light will indicate FdbK-C is charging. The light turns off when fully charged.
Low power – 3 tones and a RED light flashing twice every 10 seconds signals the battery needs to be charged.
The battery will drain if FdbK-C is not used for a long time. If this occurs, Fdbk-C must be charged before use.
NOTE: Low battery power indications will not be present.
Power / Pairing
Power On/Power Off
Power On – Press and hold the button for approximately 5 seconds. Release when 1 tone is heard and BLUE light flashes quickly 3 times.
Power Off – Press and hold the button for approximately 5 seconds. Release when 1 tone is heard and RED light flashes quickly 3 times.
Enter Pair Mode
When the FdbK-C is off, press and hold button for approximately 8 seconds. Release when 2 tones are heard and RED and BLUE light flash alternately.
Ensure the FdbK-C is within 3 feet of mobile device.
Using the Bluetooth manger on your mobile device, find FdbK-C and select it for pairing.
If asked for a password, enter “0000”
After successful pairing, the BLUE light will flash once every 30 seconds.
FdbK-C will automatically connect to the last paired device when powered on.